03 July 2018

Sea of Peace Award 2018 (SOP) started!

Sea of Peace Award 2018 (SOP) started!
 
If you want to get beautiful pennon or following your last year achievement you would like to continue to get sticker then you should turn on your radio and pay attention to the stations from the required countries during the July 2018...

This certificate in form of a silk pennon will be awarded for QSOs with the Baltic neighbouring states and regions in July. Annual stickers can be acquired for repeated fulfilment of the rules during the subsequent years.


Beyond coming SOP-owners will receive special recognitions after 5-and 10-times achievements of the pennon and stickers.



This popular certificate was awarded by the amateur radio organisation of the former GDR in 1958. And has been continuing by the DARC district Mecklenburg-West Pomerania since 1991.

In 2018 we celebrated 60 years of SOP with a special call signs DL60SOP.

Supplement for 2018: Foreign stations with the suffix "SOP" (e.g., OZ4SOP, SJ1SOP...) count as a joker for a not achieved area.
 
http://ok1rp.blogspot.com/2017/07/sop-sea-of-peace-hunting-started.html
http://www.dl0sop.darc.de/Seite-1e.htm

01 June 2018

Are you a True Blue DXer?


If watching a computer make contacts for you is not your idea of DX...

If you are decoding by human ears and brain power...



...then you are a True Blue DXer!






LET US TELL YOU RIGHT AWAY: WE ARE NOT AGAINST ANYTHING, OR ANYBODY

Digital modes, particularly FT8, have literally taken Ham Radio by storm. We at True Blue DXers Club (TBDXC) applaud technical innovation, and we are glad that so many people have found a new avenue for their amateur radio passion. We wish digital operators every success and lots of enjoyment.

 

HOWEVER

We are somehow saddened that such explosion of activity has come to the detriment of traditional, person-to-person modes of communication. Experience tells us that, even with poor propagation and rising noise, both high-level, competitive DX activity and leisurely rag-chewing on CW and SSB are possible and highly enjoyable, even for stations with modest means. Yet, the CW and SSB sub-bands are often nearly deserted, whilst the FT8 "watering holes" literally explode with signals which would be perfectly copyable by ear.


WE RECLAIM THE PRIDE AND JOY OF DXing AS A DIFFICULT, CHALLENGING PURSUIT

DXing means pushing the limits - one's own and the station's. DXing requires skills, knowledge, determination, patience, endurance, investment - it's a constant pursuit of excellence, one that, for some, has lasted a lifetime. It is that spirit that makes a DXer, and not the results he or she has achieved. The Old Timer waiting for the last DXCC country to complete the #1 Honor Roll and the newcomer struggling to push beyond 100 from a noisy city lot belong together - they are True Blue DXers.




WE LOVE THE PLEASURE AND WARMTH OF PERSON-TO-PERSON COMMUNICATION

There is more to DXing that competing in furious pileups, waiting for that elusive 6m opening or spending sleepless nights trying to dig a signal out of the noise on Top Band. Simply communicating with a fellow ham thousands of miles away remains, for most of us, an exquisite pleasure. True Blue DXers love the sound of DX - the auroral flutter on Polar paths, the slow fading over the oceans, the slap-back delay on multi-paths. They like to hear that there is a fellow ham behind the key or the microphone, in a faraway place.

IF THESE SIMPLE IDEAS SPEAK TO YOU, YOU ARE A TRUE BLUE DXer

Then, why not joining the Club? Apart from your personal commitment to pursuing and promoting more traditional forms of DX activity, there are no requirements. And, there are no membership fees. Belonging to the True Blue DXers Club is essentially a proud statement: this is what we do, this is what we are.




TBDXC link: http://www.tbdxc.net


73 - Petr, OK1RP

TBDXC #12
 

24 May 2018

The 17th A1Club QSO Party 2018

[Japanese]
A1 Club is pleased to announce the              A1 Club QSO Party, which is open to all radio amateurs world-wide and which
aims to encourage the use of and excellence in Morse code.                                            Event: The A1 Club QSO Party.
This is an operating event, not a contest.

Date & time:
From 2018-4-30 15:00Z to 2018-5-31 15:00Z, for a month
.

Object:To try communication by the international Morse Codes on all amateur bands.

Exchange: Normal QSO style. --> Ragchew if possible
<
a QSO which includes at least an exchange of information other than RST report.>

Frequencies: CW portions of the amateur bands assigned in each country where you operate.


Mode: CW using the internatinal Morse code

Internet Tool: Following internet sites are recommended to find participants.

A1 CLUB Facebook Group


Activity Report: Send following information from the [ENTRY FORM]
(1) Your Callsign, (2) Your name, (3) Comments, (4) Photos (if any)
< The entry form will be available from 1st May to 15th June>

Certificate: No awards will be given as this is not a contest.
An entry certificate in electrical format will be provided on request (see entry form)
           


RESULTS(in Japanese)         A1 CLUB Top

11 September 2017

Looking for clean SS HF PA w/QSK - part 5 (Elecraft)

Hi all,

"Everything goes very well with the FCC approval and there will be the KPA1500 linear amplifier official announcement soon on Elecraft list and Elecraft pages as informed Wayne, N6KR few weeks ago....

Short time after I noticed the note that FCC approval arrived and KPA1500 is ready for orders! Official announcement then appeared on the Elecraft pages as same as on the Elecraft mailing list quickly.

So new 1,5kW Solid State HF-6m PA w/QSK was born in Elecraft and it comes to be available worldwide. soon

As you know my preview parts talked about:
SPE EXPERT 1.3K-FA
ACOM 1200S
JUMA PA1000
LINEAR Amp Gemini HF-1K

Azden AZR-1000


The Elecraft KPA1500 is 1500 watt PEP output, MF, HF and 6 Meter linear amplifier. It utilizes the latest LDMOS transistor technology to provide a robust desktop amplifier in a compact cabinet, with an included companion power supply that can be located off your desktop.

The Elecraft KPA1500 was designed with the serious operator in mind. Its no-nonsense front panel shows all important parameters at a glance, with a high-contrast 32-character LCD and fast, bright LED bar graphs. Band switching is instantaneous, via control inputs or RF sensing. Protection and monitoring circuitry is extensive and foolproof, letting you focus on the job at hand — breaking pileups and overcoming the most difficult operating conditions. And it wouldn’t be an Elecraft amp without robust PIN-diode T/R switching. Like the KPA500, the KPA1500 offers fast QSK without a noisy relay!


So it looks like there is "thanks god" second 1kW+ SSPA with silent, fast and well working QSK system on the market...


The amplifier’s rugged internal ATU can handle full power with load SWR up to 3:1, while a wider matching range is allowed at lower power levels, including up to 10:1 in standby mode.



Compare to their preview products initially this KPA1500 will be available in Factory-built form only.

According to Elecraft announcement an introductory pricing is $5,995 U.S. This includes the 1500-watt linear amp. internal tuner and separate switching power supply.

Compare it to other amplifiers on the market and you will notice that it is not so bad.

The most important KPA1500 features:

- 1500W RF output
- Very compact design
- Fast, silent PIN diode T/R switching system
- Built-in Antenna Tuner with dual antenna jacks
- Compatible with nearly any transceiver
- 160-6 meters



Freq. (MHz)Pin (W)Pout (W)Gain (dB)
1,963150013,8
3,7560150014,0
5,3550150014,8
7,1569150013,4
10,12550150014,8
14,17575150013,0
18,1181150012,7
21,22575150013,0
24,9367150013,5
28,8561150013,9
5278150012,8

New KPA1500 solid-state amplifier won’t take over your entire desktop: it’s just 4,5 x 13,5 x 11,5” (HWD; 11,5 x 34 x 29 cm). The lightweight companion power supply can be placed on the floor or in any other convenient location...

According to the user guide the duty cycle at 1500W out is 10mins key down / 5mins standby.

Interesting functions:

- Automatic Band Switching mode
- Manual Band Switching mode
- Coordinated K3 and KPA1500 Band Switching mode
- Remote PC control using RJ-45 or USB
- Power meter internal calibration procedure (PWR ADJ)
- Internal automatic band selection w/master-priority to protect KPA1500
- Icom, Yaesu and BCD codes available to incorporating w/other radios

Thanks to Martin, OK1RR and OKDXF you can find more details here(CZ) or as follows:
KPA1500 User Manual.pdf
KPA1500 Pics outside.pdf
KPA1500 Pics inside.pdf
KPA1500 EMC test protocol.pdf
KPA1500 EMC test pics.pdf
KPA1500 Spectrum purity.pdf


If you remember the LinearAmp Gemini HF-1K
http://www.linamp.co.uk/gemini_HF.html 
implemented the fully solid state QSK switching. No relays. Diode switched system turned of hard by a 300V rail.

So there is another competitor on the market with robust PIN-diode T/R switching and even more power up to 1,5kW.



KPA1500 Shipments are planned to start Mid to Late October against the backlog.


Links:
KPA1500 Flyer.pdf
KPA1500 FAQ.pdf

Ordering info


73 - Petr, OK1RP
"auf die Dauer hilft nur Power" (Erich, HB9FIH)




08 September 2017

Looking for clean SS HF PA w/QSK - part 4 (Azden)

Hi all,

next part of my investigation on the market in order to find highly reliable, output clean, compact, solid state HF-6m bands PA with 100% working, smooth QSK at around 1-1.2kW heavy-duty output and standard radio interface is here...


As you know my preview parts talked about:
SPE EXPERT 1.3K-FA
ACOM 1200S
JUMA PA1000
LINEAR Amp Gemini HF-1K

After the Japan Ham Fair I realized that two new SS amps by AZDEN are coming to the market. As I read somewhere already the AZR-550FZ looks a lot like a Tokyo Hy Power clone and the second bigger brother the AZR-1000 looks a little like an all black SPE Expert 1K...

What can we find at that moment (as Azden has nothing on their pages in Ham radio Products section yet) is as follows:

Azuru/Azden Corporation is a booth of HamFair 2017 at the company’s booth, HF (1.8 to 28 MHz band) + 50 MHz band linear amplifier “AZR – 550 FZ (maximum output 550 W)” and “AZR – 1000 (maximum output 1,000 W)” using MOS FET We released two models. Both are small and lightweight by adopting switching power supply.

● AZR-550FZ is a compact and lightweight HF band linear amplifier. By adopting the switching power supply, the total mass is only 9.2kg, it is very convenient to carry.

● MOS FET (4x MRF 150 in parallel) adopted. Maximum output is 550 W. It has the characteristics of broadband amplifier, only band filters switching are adjusted.





● Supply voltage range from AC 100V to 240V without switchover, wide range of operations can be performed not only in Japan, but also overseas DX-peditions.

● Drain current (ID), drain voltage (VD), output power (PF), reflected power (PR) can be measured with a multimeter, and the operating status of each part can be easily confirmed.

● Protection circuit is carried for each part protection. Over input, SWR excessive, abnormal overheating, drain overvoltage, overcurrent.

● Size: 232 W × 142 H × 392 D mm, Weight 9.2 kg

According to the company, this linear amplifier is domestically manufactured and the auto antenna tuner is not installed. It is a reprint version of HL – 550 FX that was released from Tokyo Hy Power. It is scheduled to be released within the year.





● AZR-1000 is a compact HF band linear amplifier. By adopting a highly efficient switching power supply circuit using SiC, it has become compact and lightweight.

● Use MOS FET (8x VRF 151 in push-pull). Maximum output is 1,000 W (SSB/CW) It adopts low distortion broadband amplifier, it can obtain 1,000 W typical power.

● Supply voltage range from AC 100V to 240V without switchover, wide range of operations can be performed not only in Japan, but also overseas DX-peditions.

● Operation status can be easily controlled by LCD display.

● Protection circuit is carried for each part protection. Over input, SWR excessive, abnormal overheating, drain overvoltage, overcurrent.

● Size: 370 W × 200 H × 300 D mm, Weight 15 kg





The display of the AZR – 1000 is a touch type and the size is 7 inches. This is for the operation of the built-in auto antenna tuner.

According to the company, this product is equipped with an auto antenna tuner of type that measures the impedance of the antenna and takes matching. In addition to the SSB/CW, RTTY etc. can also get output of 1,000 W, they says. The display is a touch type, and it is possible to connect to each company transceiver of the type that outputs band data. The product is domestically manufactured, the release is scheduled for 2018.


The AZR-1000 has six antennas switch implemented. Each antenna can be assigned to each frequency. That means, if you preset antenna and the frequency into the AZR-1000 and when transmitting, the AZR-1000 recognizes the TX frequency and switches antenna as preset. That is not all. The AZR-1000 will adopt silent switching mechanism. Some conventional ATUs alter relay sound noise. The AZR-1000 will reduce the noise sound drastically. The show model is only for displaying. "Concept of the AZR-1000 has been finished. Now we make samples and test." A staff said at Tokyo HamFair...



There is nothing about the T/R switching circuitry but it sounds promising. On the other hands remember all of the horrible T/R switching circuits in Japanese radios for past years so we should be very careful and wait for more detailed information and field tests of the QSK feature!

The AZR-550FZ should be offered at 285,000Yen ($2600).
The release date for AZR-1000 will be 2019. Price might be less than $7000.

Links:
Azden at Hamlife.co.jp
Azden.co.jp
QRZ.com

Do not hesitate to email me in case of translation help needs...


73 - Petr, OK1RP
"auf die Dauer hilft nur Power" (Erich, HB9FIH)








04 July 2017

SOP - The Sea of Peace hunting started...

Hi all,

The Sea of Peace hunting started. If you want to get also your beautiful SOP pennon awarded first time by the amateur radio organization of the former GDR in 1958... then you should turn on your radio!

SEA OF PEACE is the certificate steeped in tradition of the DARC district Mecklenburg-West Pomerania.


This certificate in form of a beautiful silk pennon will be awarded for QSOs with the Baltic neighbouring states and regions in July. Annual stickers can be acquired for repeated fulfillment of the rules during the subsequent years.


Beyond coming SOP-owners will receive special recognitions after 5-and 10-times achievements of the pennon and stickers. This popular certificate was awarded by the amateur radio organization of the former GDR in 1958 and has been continuing by the DARC district Mecklenburg-West Pomerania since 1991.


In 2008 it was celebrated 50 years of SOP with a special call signs and a jubilee pennon.

The SOP pennon is pentagonal and multicolored; 22 cm wide and 33 cm long. The sticker about 7 cm wide and 10 cm long.

Links:
http://www.dl0sop.darc.de/Seite-1e.htm
http://www.dl0sop.darc.de/Seite-2e.htm


73 - Petr, OK1RP

07 February 2017

Elecraft KPA500 - LPF T/R Switch Rework Rev. E

Hi all,
 
if your KPA500 has LPF board rev. D9 or earlier with surface mount board then you will probably need to make LPF T/R Switch Rework Rev.E modification, Elecraft parts kit: E850607.

The modification can be done as prevent action in order to avoid the loosing the full power accompanied by burning smell or it can be the solution for your already ruined amplifier.

Caution!  This mentioned E850607 parts kit is needed for the Rev. D9 board that is populated with surface mount components! If you have an EARLIER board (A or B) that has the non-surface mounted yellow capacitors it is not for you... Because Elecraft could no longer procure components for the A or B boards, they went with a surface mount board in later KPA500 units. It is this surface mount board that needs its parts changed and not the earlier A and B boards.

As I cured several of the KPA500 amps for friends around me using this modification and I still getting emails regarding this kind of rework, manual, parts needed etc. I decided to post short article over here in order to help to others.




The typical KPA500 misbehavior sounds like it is arcing inside and smells the classic something is burning smell. The SWR LED's are dancing upwards as it arcs. If you have connected the KAT500 tuner then it has the SWR around 1.3:1... and power is lost. Try to read first then decide...




If you want and you have SMD tools as same as ESD protection tools then you can try to make this mods first and test if it was the root-cause of your problem. If not then you can send to Elecraft service.




It is not complicated just a bit tight on the board and there is not so much space around the parts to remove the old one.

Step 0. Remove the PA/LPF module from your KPA500 amplifier unit. It is not so complicated just maybe a bit tricky. I can recommend to follow the Elecraft KPA500 Kit Assembly Instruction manual (which is downloadable on the Elecraft web pages in Manuals section) but in reverse direction.





See and follow the Pages 28 - 21 in this manual including the pictures of the module in the cabinet. KPA500 Assembly Instruction


Step 1. Check if it is applicable for your KPA500.




Your Low Pass Filter board the Elecraft part number E850406 is old Rev.D9 or earlier.


Step 2. Remove the parts and replace with new one.


 
KPA500 LPF module Rev.D


1. Remove R9 and replace with new 6.8Ohms/1.5W size 2512 resistor


Elecraft part - E500567
Digikey part - RPC2512JT6R80CT-ND


2. Remove R24 and replace with new one 1kOhm size 0805 resistor


Elecraft part - E500230
Digikey part - 311-1.00KCRCT-ND
 
3. Remove Q5 and replace with new BU931T transistor


Elecraft part - E580068
Digikey part - 497-2797-5-ND


4. Remove R5 resistor (no replacement)


5. Check R3 and verify that in this position of R3 is soldered Zener diode. Many people asked me how to determine that it is diode instead of resistor. If it is diode the band on the component is visible and this band will point to Q4 when installed.


Elecraft part - E560074
Digikey part - CD1005-Z7V5-ND


6. Check C43 and verify by C-meter that in this position C43 is soldered 82pF. It is in 12m band LPF part. If you are not sure or you can not measure it to double check then replace it with new capacitor 82pF value.


Elecraft part - E530494
Digikey part - 490-11627-1-ND


7. Check C44 and verify by C-meter that in this position C44 is soldered 68pF. It is in 12m band LPF part. If you are not sure or you can not measure it to double check then replace it with new capacitor 68pF value.


Elecraft part - E530489
Digikey part - 1206GA680JAT1A-ND

Digikey part - GRM31A7U3D680JW31D-ND
Mouser part - 81-GRM31A7U3D680JW1D

8. You should mark your modified board with Rev.D10 label in order to identify it later if needed.


KPA500 LPF module Rev.B

All work must be done very carefully. Do not overheat the PCB and check that you are not damaging the nearest parts with your hot soldering tip while you are removing the desired parts.

I made this modification on KPA500 for several friends already and in all cases their amplifiers worked well after that.

The datasheet for Darlington BU931T is here.

Drop me an email if you need the complete manual for the KPA500 LPF T/R Switch Rework Rev.E modification in pdf format. The parts can be purchased from Digikey or other suppliers. If you would like to buy the parts in kit directly from Elecraft then the ordering number is E850607.

Caution 2! If you are not moderately experienced with SMD or if you have not the SMD tools like soldering machine, hot-air machine, fine tweezers or if your hands and eyes are no longer reliable... or you do not know what is the SMD then I am recommending to ask someone close to you with these capabilities to help. In the opposite case I am strongly recommending to contact Elecraft service directly.

Hope it helps.

Document revision (rev.10-19) dated 1-Oct-2019


73 - Petr, OK1RP