This software update improves performance, fixes bugs and add new functions regarding CAT commands. Here are key points of this update:
- AGCS line (switching AGC action slow/fast) is now delayed 0.8sec after power on;
- Resolved “Erratic VFO hops” issue when main dial is on 256 ppr.
- 6 new CAT commands added to current RGO ONE V6 command set. ID command is split into two commands – ID and SN:
1. FW; – software version
2. ID; – model version (current model is 006)
3. SN; – main uC serial number (needed for software unlock and unlock code generation)
4. MC; – memory recall function 00-99
5. MR; – memory read – reads memory parameters from certain mem channel
6. MW; – memory write – writes memory parameters to certain mem channel
2. ID; – model version (current model is 006)
3. SN; – main uC serial number (needed for software unlock and unlock code generation)
4. MC; – memory recall function 00-99
5. MR; – memory read – reads memory parameters from certain mem channel
6. MW; – memory write – writes memory parameters to certain mem channel
- Added new menu entry 03 ttLPrt. Two options available – nor and SYnC. When SYnC option is selected second TTL CAT port acts as a slave to a main USB CAT port. CAT inquiries received on USB port are being answered to both ports. Nor option gives two independent CAT ports (USB and TTL UART).
- Flash update procedure is executable even if missing or malfunctioned of some hardware module/boards.
No comments:
Post a Comment