Ten-Tec White paper 1/2025 - Removing the knobs on the Omni VII

Ten-Tec White paper 1/2025 - Removing the knobs on the Omni VII

This guide could be used on all other rigs with the same knobs used.

Large VFO Knob

1. Slide the rubber ring off the knob.
2. Use a 1/16" Allen wrench to loosen the set screw.

Small Knobs

1. Slide the sliver ring off the knob. (The ring may be tight requiring a small screw drive to pry it off slightly.)

  2. Use a 0.050" Allen wrench to loosen the set screw.