News from Boris as follows:
We are ready to upload new firmware version files for RGO ONE V6.
Changes include improvements in the user interface – added LCD labels, hardware control refinements, added new CAT command:
Audio peak filter indication On/Off. Now LCD shows the state of the APF. When APF is on – LCD shows “PFon”; When it is off LCD shows “PFof”.
When CW auto tune procedure is activated with short press of ENC.3 (RIT/XIT encoder) – LCD shows “Auto” so the operator may know that CW autotune procedure has been started. Label “Auto” disappears when CW auto tune procedure is finished.
Menu 47 (CW keyer auto space feature) is now active even when AF board is missing. This was bug of the software.
TXG line which is controlled by ALC circuitry is now with better range – 1.3 – 2.6V.
New CAT command is added – EX command. All menus can be read and set accordingly. EX083 function is added for internal autotuner L, C, HiZ/LoZ parameters set/read.
Watch the download page here: RGO ONE V6 Firmware updates – RGO ONE
--
73 - Petr, OK1RP
When CW auto tune procedure is activated with short press of ENC.3 (RIT/XIT encoder) – LCD shows “Auto” so the operator may know that CW autotune procedure has been started. Label “Auto” disappears when CW auto tune procedure is finished.
Menu 47 (CW keyer auto space feature) is now active even when AF board is missing. This was bug of the software.
TXG line which is controlled by ALC circuitry is now with better range – 1.3 – 2.6V.
New CAT command is added – EX command. All menus can be read and set accordingly. EX083 function is added for internal autotuner L, C, HiZ/LoZ parameters set/read.
Watch the download page here: RGO ONE V6 Firmware updates – RGO ONE
--
73 - Petr, OK1RP
