Ten-Tec MODEL 594 - PHOENIX is coming!
PRELIMINARY SPECIFICATIONSUBJECT TO CHANGE WITHOUT NOTICE
The Ten Tec Model 594 Phoenix is an all new from the ground up dual direct digital down conversion (DDC) software defined radio (SDR) suporting a number of innovative and unique at this time features.
GENERAL:
GENERAL COVERAGE: 300 KHZ-55 MHz, Specifications guaranteed in Amateur bands.
SUPPLY VOLTAGE: 13.8V ± 15%
FREQUENCY ACCURACY: ± 5 Hz @25 C
FREQUENCY STABILITY: ± 0.5 PPM over operating temperature range
DIMENSIONS (HWD): 4.14 x 9.06 x TBD inch, 105 x 230 x TBD mm, (excluding connectors)
FRONT CONNECTORS: Headphones, Mic: 1/8th inch stereo plug 2 x USB2
REAR CONNECTORS: RF: 2 x SO-239. Accessory Connector, Band Data Connector, Power Connector. HDMI connector, USB3 connector, Predistortion input
SINGLE ADC: Two receivers in same band (Main and Sub)
(with SECOND ADC option) Two receivers in any band
MDS (Preamp off / on): -117 dBm / -134 dBm, ± 3 dBm typical
ADC OVERLOAD POINT: +4 dBm without attenuation.
BLOCKING IMD (Preamp off/ on): 120 / 121 dBm typical
RECEIVE CURRENT: < 2A
TRANSMITTER:
POWER: 5-100W ± 1dB
DUTY CYCLE: Continuous SSB/CW, 50% AM, FM, PSK/digital
TX BW: 300 Hz-6KHz, adjustable
FM DEVIATION: ± 5KHz
HARMONIC & SPURIOUS EMISSION:
1-30 MHz: < -50dBc @ 100W
30-55 MHz: -60 dB @ 5-100W, -43dBc < 5W
THIRD ORDER IMD: -60 dB below PEP, minimum
ADAPTIVE PREDISTORTION: Internal, and sample port from external amplifier
TX / RX RECOVERY TIME: < 20ms
RISE AND FALL TIME: 5ms
CW OFFSET: adjustable
CW KEYER SPEED: 5-50 WPM, Adjustable weighting/
CW KEYER: Curtis Mode B, USB Keyboard
CW MEMORIES: 10
TRANSMIT CURRENT DRAIN: 20A Typical
ANTENNA TUNER:
TYPE: Reversible L network
MATCHING FREQUENCY RANGE: 160-10m, no 6m.
MATCHING RANGE 10:1 SWR typical
REMOTE CONTROL:
Full Remote Station Control using Client/ Server architecture.
Embedded web server with no external software ready to go out of the box.
Ten-Tec web: MODEL 594 PHOENIX - coming soon
Ten-Tec at Hamvention 2025: Phoenix 594 at Hamvention 2025
...more info is coming soon, stay tuned!
No comments:
Post a Comment